Double or Tandem Mechanical Seals



Double or tandem mechanical seals are typically used in services involving toxic,
flammable, or hazardous liquid to prevent the liquid, or its vapor, from leaking into
the environment due to a leak or seal failure.


Double seals

A double mechanical seal is a combination of two seals mounted back-to-back
with a non-hazardous barrier liquid injected between the two seals at [ * ] to [ * ]
PSIG above the stuffing box (or seal chamber) pressure. The barrier liquid comes
from an external source such as a pressurized reservoir in a closed loop piping
system connected into, and out of, the seal gland.

Double seal arrangement is intended to seal the barrier liquid, not the process
liquid. The arrangement consists of an inner or primary seal installed in backward
position, and an outer or secondary seal installed in normal position. The
backward position of the inner seal prevents the barrier liquid from entering the
pump at normal condition. In the event of an inner seal failure the barrier liquid
enters the pump and prevents the process liquid from leaking into atmosphere. In
the event of outer seal failure, the non-hazardous barrier liquid leaks into
atmosphere while the inner seal contains the process liquid.


Tandem seals

A tandem mechanical seal arrangement is also a combination of two seals but
they are mounted in the normal position, as opposed to the back-to- back position
of a double seal. A barrier liquid is also injected between the two seals from an
external reservoir in a closed loop piping system but it is not pressurized.

The barrier fluid is circulated by the centrifugal force effect of a pumping ring in the
seal. The pressure in the stuffing box is higher than in the barrier chamber so
when the inner seal fails the process liquid enters the barrier chamber and forces
the oil reservoir level to rise. A high oil level switch will trip an alarm and the pump
is shut  down. The process liquid is piped out from the of the reservoir into a safe
disposal area.

Double and tandem seals are usually flushed using API Plan 52 or Plan 53 (or the
equivalent piping plans in non-API pumps.)


Frictional horsepower

The use of double or tandem seal arrangement increases the seal frictional
horsepower (HP) draw on a pump; numerous tests indicate that it can be as high
as [ * ] HP. This should be taken into consideration when sizing the driver of small
pumps such as size 2x3x13, or smaller, and those requiring [ * ] HP, or less. The
failure to account for the seal frictional HP can result in selection of drivers with
insufficient torque.


[ * ] Some information are excluded in this article.
Read more.
CENTRIFUGAL-PUMP.ORG
Related topics

Mechanical seals vs. packing rings
Double or tandem mechanical seals
Mechanical seal flush piping plans
TECHNICAL

Concepts

Parts

Auxiliaries

Glossary

Engineering data

Library

Bulletin board




Go to our Sitemap
for list of articles



By accessing this site
you agree to our
Terms of Use and
Legal Disclaimer



Copyright notice
Privacy policy
Custom Search